Delhi
GST No. 07AAGCA3176N1ZC
Send Email
Call 0804298356480% Response Rate
Search
Cleaning Chemical & Spray
Providing you the best range of 2009mlf-e pacific sprayable flux, 99.8% isopropyl alcohol, peelable mask, flux cleaner, g3 clean flux remover and 1720-g zero charge static dissipative floor coating with effective & timely delivery.2009MLF-E Pacific Sprayable Flux
REQUEST CALLBACK
Get Best Quote
Approx. Rs 889 / LitreGet Latest Price
Product BrochureProduct Details:| Packaging Type | Plastic Can |
| Packaging Size | 20-25 Liters |
| Form | Liquid |
| Density | 1.00 g/ml +/-0.01 |
| Solid Content | 3.6% +/-0.2 |
| Total Acid Number | 25 mg KOH/g +/- 2 |
Yes! I am Interested
99.8% Isopropyl Alcohol
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,889 / BottleGet Latest Price
Product Details:| Brand | Techspray |
| Packaging Type | Can |
| Packaging Size | 5 Liters |
| Form | Liquid |
| Pure | 99.8% |
Pure anhydrous(containing the least water possible and no denaturant isopropyl alcohol is excellent for tape head cleaning, defluxing, stencil cleaning, other light cleaning, and as a flux thinner. Avoid "bargain" alcohols for critical electronic cleaning. Cheap alcohols contain much more water, which slows drying and can cause oxidation, while "denatured" alcohols leave residues.
Yes! I am Interested
Peelable Mask
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,100 / BottleGet Latest Price
Product Details:| Packaging Type | Bottle |
| Packaging Size | 250 ml |
| Model Number | 2211-8SQ |
| Form | Liquid |
| Application | Industrial |
We are dedicatedly involved in providing a wide array of Peelable Mask.
Yes! I am Interested
Flux Cleaner
REQUEST CALLBACK
Get Best Quote
Approx. Rs 500 / PieceGet Latest Price
Product Details:| Brand | Techspray |
| Packaging Type | Bottle |
| Density | 0.72 g/cm3 |
| Packaging Size | 100-200 ml |
| Surface Tension | 18.6 Nm |
| Form | Liquid |
Yes! I am Interested
G3 Clean Flux Remover
REQUEST CALLBACK
Get Best Quote
Approx. Rs 500 / PieceGet Latest Price
Product Details:| Packaging Type | Bottle |
| Density | 0.72 g/cm 3 |
| Packaging Size | 100-200 ml |
| Form | Liquid |
| Surface Tension | 18.6 Nm |
G3 Clean Flux Remover The patented formula of No Clean Flux Remover was developed to be the direct replacement for defluxers containing HCFC-141b. It is designed specifically for removing R, RA, RMA and SA type flux residues after high temperature reflow. This flux remover can be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases and similar contaminants often found in electronics manufacturing. Its Non-Ozone Depleting, Non-Flammable, Safe on Most Plastics Rapidly Evaporating, Zero Residue. Various packing available. For More details Download PDF.
Yes! I am Interested
1720-G Zero Charge Static Dissipative Floor Coating
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product Details:| Usage/Application | Floor |
| Packaging Type | Bottle |
| Packaging Size | 5-6 Liters |
| Form | Liquid |
| Brand | Techspray |
| Model Number | 1720-G |
Features:
- High gloss floor finish manufactured for use in electronic production areas, computer rooms, or any other static sensitive areas
- Contains a non-migratory, static dissipative polymer
- Polymer will maintain a constant surface resistivity of 106-108 ohms even in low humidity
- Zinc free
- Slip-resistant
Yes! I am Interested
1733-PT Zero Charge Mat and Tabletop Cleaner
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Usage/Application | Mats, Surfaces |
| Packaging Type | Bottle |
| Physical State | Liquid |
| Shelf Life | 3 Month |
| Model Name/Number | 1733-PT |
| Volume | 200-300 ml |
1733-PT Zero Charge Mat and Tabletop Cleaner spray Bottle: will Clean flux and other residues off of ESD-Safe mats and tabletops, Will not dry out surfaces (i.e. IPA) or leave insulative waxes (i.e. household cleaners). Rejuvenates ESD-Safe Mats, Will Not Dry Out Surfaces, Leaves No Insulative Film, Non-Flammable, No Ammonia.
Yes! I am Interested
1756-8S ESD Permanent Coating
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Packaging Type | Bottle |
| Ph Value | 8.5 |
| Flash Point | 53.1 Deg F |
| Maximum Operating Temperature | +302 deg F |
| Model Number | 1756-8S |
| Shelf Life | 6 month |
1756-8S Permanent ESD Coating Spray Can will save you much cost to buy expensive ESD products or will help you to convert non available ESD product to ESD for your electrostatic protected Area. Coating is crystal clear, permanent static disipative10^7-10^9 OHMS Complies with ANSI/ESD-S20.20, Humidity Independent, superior adhesion, non Ozone depleting. Product suitable for Various applications like Electronic Assembly Work Stations, Bins, Carts, and Trays, Electronic Assembly Work Enclosures, Including Plexi-Glass , Packaging For Sensitive Components , Production Conveyors & Bumpers , Static Protection for Electronic Devices For More details Download PDF.
Yes! I am Interested
1977-DP Heat Sink Compound
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Packaging Type | Tube |
| Service Temperature Range | -40 deg C to 200 deg C/-40 deg F to 392 deg F |
| Dielectric Strength | 15 KV/mm |
| Tangent of Loss Angel | 5 x 10-3 |
| Volume Resistivity | 1 x 1015 ohm.cm |
| Model Number | 1977-DP |
1977-DP Heat Sink Compound Heat sink draws heat away when applied to a component. In electronics, heat sink compound is generally used to thermally bond a component with a mechanical heat sink. For electrical applications, it is used with thermocouple wells, thermistors, and calrods, or wherever efficient cooling is required. Ideal for electrical applications, Functional Temperature Range 55 to 205 deg C, Easy Application, Will Not Harden and Crack in Pack of 4 oz squeeze tube. For More details download PDF.
Yes! I am Interested
Peel Away Reflow Oven Shield Cleaning Chemicals
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product Details:| Brand | XT-Armor |
| Packaging Type | Bottle |
| Boiling Point | 100 deg C (212 deg F) |
| Density | 1.07 g/ml 25 deg C (77 deg F) |
| Ph Value | 8-9 |
| Form | Liquid |
XT-Armor Oven ShieldTM Reflow Oven & Wave Maintenance Coating is a water-based, environmentally friendly coating that is designed to protect PCB assembly equipment from flux residues adherence. Flux sticks to the coating surface and then peels off – drastically reducing maintenance time.
Feature:
- Reduces maintenance labor and equipment downtime
- Protects capital equipment from scraping and abrasive cleaning equipment
- Prevents excessive flux accumulation from dripping on PCB's
- Peels off easily
- Cures during equipment heat up cycle
- Low odor, non-hazardous, non-flammable
- Easy wash-up with water
- Environmentally friendly
- Halide-free
Yes! I am Interested
IF-910 De-Oxidation Oil
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product Details:| Packaging Type | Bottle |
| Specific Density | 0,890 g/ml |
| Appearance | Oil |
| Flash Point | Less Than 200 deg C |
| Auto Ignition | Less Than 270 deg C |
| Model Number | IF910 |
IF 910 De-Oxidation Oil is oil to seprate metal from oxides in solder bath the good, shinysolder particles are remelted in the solder bath, and only the oxides will remain, which can be remove easily. For detail down load PDF.
Yes! I am Interested
Looking for Cleaning Chemical & Spray ?
X
Explore More Products
Contact via E-mail
Contact via SMS
Ajay Gupta (Director)
Advance Tech Services Private Limited
Advance Tech Services Private Limited
E-981, Saraswati Vihar, Pitampura
Delhi - 110034, India
Delhi - 110034, India
Call Us: Call Response Rate: 80%
© Advance Tech Services Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited